55 rear Bumper
Posted by 55packard400 On 2019/9/27 5:59:22
Hello All
I would like to know on the three piece Rear bumper if the end pieces where the exhaust exits through can be removed/replaced without removing the rear bumper from the car. I can't find anything in the service manual to confirm this. As far as I can see there are only 2 bolts holding it in place.As always thanks for any information it's always appreciated.
Thanks
Attach file:
(366.59 KB)
(452.89 KB)
I would like to know on the three piece Rear bumper if the end pieces where the exhaust exits through can be removed/replaced without removing the rear bumper from the car. I can't find anything in the service manual to confirm this. As far as I can see there are only 2 bolts holding it in place.As always thanks for any information it's always appreciated.
Thanks
Attach file:
(366.59 KB)
(452.89 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=215420