Torque Converter Removal

Posted by Scott On 2019/11/20 21:53:00
The engine was removed from my '55 Patrician. This vehicle came with a rebuilt engine and trans but the direct drive clutch has not been working from day one. With a pressure gauge I confirmed the clutch hydraulic pressure was kicking on at governed speed but no actuation.

Anyway, while removing the engine it was discovered the converter to flywheel nuts were all loose. However, the real problem is the converter will not separate from the flywheel. It's still attached to the engine and prying on it won't dislodge it from the flywheel. Any ideas?

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=216987