Re: Fuel Filter Rebuild Kit for 56 Clipper

Posted by HH56 On 2019/12/25 19:45:41
That does not look like the stock Packard filter but more like some kind of pressure regulator combination. It might have been a dealer installed aftermarket type item so you might need to determine what else it was used on to find a kit -- if any were even available. The stock filter just has a single all in one piece top casting with a replaceable ceramic element in the bowl held in position against the top casting by a spring. The casting routes the in flow directly into the glass bowl and fuel exits thru the element and back out the casting into the carb. A multi holed gasket to direct the fluid path lies between the bowl and casting.

This Post was from: