Re: 1955 Lower water hose wanted

Posted by HH56 On 2020/1/12 19:33:20

I used silicone spray on both pump and inside hose surfaces when I did mine but liquid dishwashing soap would probably work too. It was tight and you do have to use some muscle getting it started. I started at sort of an angle and then worked around getting the hose onto the rough pump casting. As I recall, once a side was started then I also used a thin offset type screwdriver with the blade oriented as circled to sort of work around the hose and help get the hose pried over the lip and started on the casting.

Attach file:

---

  (39.87 KB)