Re: 1956 monroe. Shocks

Posted by Dwight Heinmuller On 2021/2/18 19:09:14
These shocks are NOT suitable for a Torsion Level Packard. They are heavy
duty and are TOO STIFF. Torsion Level
Packards use a shock with a 1" internal piston. Gabriel and Monroe do not make
shocks that light duty, which is what TL Packards should have. USE KAYABA (KYB)
front KYB 343127, rear KYB 343149. This set will fit perfectly all 1956 Packards and Clippers. For 1955 models, the rear shocks will fit fine, but the front shocks must be modified. Lop off the lower cross bar and weld in its place a stud from any shock.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=230501