Re: 1956 400 Ultramatic Transmission Questions

Posted by Andrew M On 2021/2/25 12:55:49
Quote:

HH56 wrote:
Make sure the fluid level was checked in park or neutral with engine running or immediately after it was stopped as mentioned above.

How about the end where rod connects to the lever on the passenger side of the transmission. Make sure the rod is attached to the lever and clamp at bottom attaching to the shaft is tight. Is the lever pointing up as this photo shows?


Here is a picture of the lever on the side of the transmission. It seems to be tight. It’s not loose.

Attach file:



jpeg  7D4419E9-2DBE-4A4F-973E-35563AF5B28A.jpeg (276.43 KB)
224808_6037e49b7a415.jpeg 1440X1920 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=230743