Re: 1956 Packard Executive in France
Posted by P.J. On 2023/3/27 4:46:27
I'm still winding up my engine! Kanter sent me 1 piston +0.06 instead of +0.03...
I was wondering what kind of oil pumpe I have?
And other question regarding lifter: I bought one new set from Kanter because one of the old ones was destroyed! I put the new in oil and I pushed the top to replace the air with oil. I have a huge gap between rocker and valve if i push on the rocker on the lifter side. Is it operational only when there is the right oil pressure?
Attach file:
IMG20230326153542.jpg (117.35 KB)
IMG20230326153947.jpg (123.46 KB)
I was wondering what kind of oil pumpe I have?
And other question regarding lifter: I bought one new set from Kanter because one of the old ones was destroyed! I put the new in oil and I pushed the top to replace the air with oil. I have a huge gap between rocker and valve if i push on the rocker on the lifter side. Is it operational only when there is the right oil pressure?
Attach file:
IMG20230326153542.jpg (117.35 KB)
IMG20230326153947.jpg (123.46 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=255241