Re: Treadlevac booster working?

Posted by Ross On 2021/7/12 6:49:50
Clean out the canister and polish up the inside with Scotchbrite using an up and down motion as opposed to going roundy round.

Slap your piston back in and loosen all of the screws that hold the top plate a turn or two. Wiggle the piston back and forth a bit then retighten the screws. Take some fairly light oil and oil the wick around the leather seal with that. The piston must spring back when released.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=235068