Re: Someone hooked the battery up backwards / new member 55 Clipper Deluxe

Posted by HH56 on 2022/5/13 18:33:20
Other than trying what you mention, about the only other thing I can think of is somehow get under the pad and hold the nut. If you are going to remove the pad, easy, but if not and the nut is one of those close to the bottom of the pad possibly you can remove enough of the componentry on the right side to lift it away from the firewall enough to reach up. If the nut is one hidden under something else like the heater plenum remove that item and cut a hole in the pad to access the nut. The hole would be covered when the component is replaced.

Here are photos of the dash showing components and another without the pad where you can see a couple of the nuts.

Attach file:



jpg  AC016.jpg (680.69 KB)
209_627eeab268878.jpg 1041X1046 px

jpg  nuts.jpg (1,211.45 KB)
209_627eeb6c6b81e.jpg 1864X1358 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=243819