Re: Torsion Level System

Posted by HH56 On 2021/9/20 18:27:55
Is that as far as the compensator will move even by grounding the buss bar to the solenoid as per the service manual? As I recall, it should be able to rotate farther so the limit switch touches approximately a quarter inch in from the end of the bar. The slender part of the transverse bar is almost touching the center of the compensator when it stops.

Where are the levers on the short bars. One limit direction stops the end of the lever and transverse bar about 1/4-1/2" away from the inside wall of the frame rail. The other direction stops the lever at about a 45-50 degree angle

Attach file:



jpg  limit.jpg (143.80 KB)
209_614918f66dd8a.jpg 1200X1081 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=237067