Re: Treadle Vac Conversion
Posted by Tobs On 2022/2/8 15:54:32
The Bosch iBoosters that I know about have mc diameters of 19 or 22-25 mm, and also use pedal ratios of 3 or 4:1 (what I would call normal pedal ratios)
They also need a pretty beefy power supply, I think they have a 30-40 amp circuit breaker as supply voltage. You would also have to do some wiring from the internal travel sensor to the iBooster ECU, but that is just 4 wires. The unit would also expect wheel speed signals, but should still work in a default mode without them.
I am enjoying reading this thread, but I plan on sticking with my easamatic.
They also need a pretty beefy power supply, I think they have a 30-40 amp circuit breaker as supply voltage. You would also have to do some wiring from the internal travel sensor to the iBooster ECU, but that is just 4 wires. The unit would also expect wheel speed signals, but should still work in a default mode without them.
I am enjoying reading this thread, but I plan on sticking with my easamatic.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=240967