Re: 56 lower A arm bushings
Posted by R H On 2022/2/13 2:59:26
I think I know what to do.
Cut those washers off.
Get 1-1/4 cold roll. Drill it 3/4.
Cut it At .153 . thickness of those washers.
Then its set up like upper A arm
Making a 5/8 thick one for outside would keep bushing from going to far in.
Or 1/2inch. Or where those stops are on bushings
Have to measure..
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=241073