Re: Time for AirCon

Posted by PackardV8 On 2009/5/1 9:27:59

With my set up or the original packard bracket then one can adapt nearly ANY pump to it rather easily. It is all flat steel and STREIGHT cuts. So a standard hacksaw is about the only special tool needed.


There is 2wo minor problems with my set up. The belt ever SO SLIGHTLY tends to rub the fan pulley. Barely rubbed the paint off (not the primer yet ( i primed the pulley beforepainting)) in more than 20K miles.

Also, the oil filler cap is a bit difficult to remove due to the tOYATA hose position. BUT these are minor problems that can be worked out with better forethot and planning in the future.