Re: TL System on a '55

Posted by Marty or Marston On 2022/6/5 9:25:34
Howard thanks for your comment about the limit switch (LS). When I used an ohm meter initially it checked out OK. When I had problems determine if the issue was a solenoid everything came out OK too. I removed the bracket that held the LS and solenoids. Examining it I figured that the LS would occasionally stick on one side in the closed position. Tapping on the LS the contacts would open up..

I took the cover off the LS and lubed the shaft. I also filed the points on both sides and put the the LS back together.

It appears that everything is back in working order now.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=244675