Re: Schematic questions
Posted by humanpotatohybrid On 2022/10/13 15:16:37
Playing around with the fuse panel today I realized that the fuses fed by BAT, IGN, and ACC are grouped. (Obviously ACC is powered when the key is set to IGN too). As far as I know this is explained nowhere... I had to voltage test the contacts while turning the key to different positions. Here is the (hopefully final) diagram of what on the fusebox is powered by what.
Also, I wasn't able to see where the reverse light wires go yet as they are part of the omnibus wiring harness thru the wirewall, but I confirmed they are on the ACC circuit somewhere.
Attach file:
fuse block powerings.png (232.96 KB)
Also, I wasn't able to see where the reverse light wires go yet as they are part of the omnibus wiring harness thru the wirewall, but I confirmed they are on the ACC circuit somewhere.
Attach file:
fuse block powerings.png (232.96 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=249220