Re: Generator

Posted by Ross On 2022/11/23 18:47:07
Whilst you are there, undercut the mica on the commutator. That gives the brushes better contact to the copper.

Just went through an Autolite for a 47 Dodge. The only thing I did in there was a bit of cleaning, lubing the bushings, and undercutting the mica.

The car went from runk--runk--runk cranking to ra-ra-ra. Can you hear the difference?

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=250563