Re: 56 Ultramatic

Posted by R H On 2023/11/1 1:05:49

Well
Ross was on the right track.

Valve bodies aren't the problem.

The damn. Manual shaft. More precise..

The bolt for shift motor.

It was loose. Not sure how. But it's tight now.

Explains the weird shifts. And going out of low at a stop. The delay. And high to low rpm.

I was going to remove the valve bodies. But when I went to pull the bolt out of shift lever. It was tight.

Was always loose in R.

So pull the rear bracket off. To get to the bolt on shift motor.

So moving motor up and down. Seemed to be a gap. Shaft not moving.

So I pulled the cover off shift motor

Loosen the nut. Then turned the set screw
Motor moved up

And. When I moved motor. The shift lever moved. Where you can click the gear slots

Attach file:

---

  20231031_173914.jpg (428.69 KB)