56 TL suspension inoperative

Posted by Kip56 On 2007/7/8 18:27:18

I removed the J-6065 holding tools today after reattaching the load arms/links to the lower control arms and reinstalled the drums and tires. After checking all the solenoid wiring and fuses I switched the TL system back to the on position expecting the car to adjust back to level.

Nothing happened. The TL system was working fine when I started this project a year and a half ago and I did not touch any of the TL wiring. I double checked the fuses and searched for any loose connections but came up empty. The upper control arms are pretty much mashed against the frame bumper stop. (Picture attached.)

I am looking for trouble shooting suggestions as gremlins seem to have taken up residence in my suspension.

Thanks,
Robert.

Attach file:

---

  (27.59 KB)