Re: Ultramatic Disassembly
Posted by R H On 2024/1/27 21:39:59
Spud.
When you get to band lever.
Knock the roll pin out. To see if strut is broken.
If they are..
2 options.. one I can make you 2 from chrome moly.
Or I have NOS struts.
No charge..
Also
The levers. have a pin. Remove it.
And. You let the lever rotate around pin.
Then.
Use a spacer to center lever.
I made thick aluminum ones
.
Kevin used. Washers.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=267308