Re: Can anyone identify this part?
Posted by HH56 On 2024/2/26 20:16:03
Motor and drive mechanism for a power antenna. The vertical tube and mast section appears to be cut off but screws onto a round opening at the top of the drive section and the coiled tube which is the excess nylon cable storage section and attaches to a fitting on the drive section below the mast are missing. Here is an illustration of the power antenna assy from the 55-6 service manual.
On a 55, except for the actual bars and links connecting to wheels the torsion level components both mechanical and electrical are located almost under the drivers seat. Here is a top view of the frame showing the control switch and compensator assy with solenoids and limit switch on an attached bracket.
Attach file:
antenna.jpg (97.11 KB)
55TL 1.jpg (81.53 KB)
On a 55, except for the actual bars and links connecting to wheels the torsion level components both mechanical and electrical are located almost under the drivers seat. Here is a top view of the frame showing the control switch and compensator assy with solenoids and limit switch on an attached bracket.
Attach file:
antenna.jpg (97.11 KB) 55TL 1.jpg (81.53 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=268231