Re: V8 Engine Disassembly, Inspection
Posted by humanpotatohybrid On 2024/4/2 11:17:23
Thanks everyone. So it's OK to attach the engine with the lower flywheel cover left off. I'll get it hoisted up again and remove the flywheel cover, flywheel, and oil pan.
I'll double check the CG. Should be able to find some angle iron or something to stick in there and extend it a bit.
By the way, you should see the original stand we tried using. Surprisingly it held through we never lowered the lift any more than to take off the weight. It won't surprise you to learn that disassembling that stand later required a long ratchet to crank out the leg bolts.
(BTW the wood on the front was off the ground.)
I'll double check the CG. Should be able to find some angle iron or something to stick in there and extend it a bit.
By the way, you should see the original stand we tried using. Surprisingly it held through we never lowered the lift any more than to take off the weight. It won't surprise you to learn that disassembling that stand later required a long ratchet to crank out the leg bolts.
(BTW the wood on the front was off the ground.)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269629