Re: Dimmer Switch

Posted by HH56 On 2024/4/23 15:02:13

Most likely. The switch has 3 terminals, one being common which in a 56 should be power in and on a gray wire coming from the headlight switch. Out would be light green for hi beam and brown for low beam which are going to the junction blocks on each fender.

The indicator light is fed from the same terminal at the dimmer sw as is the high beam wire so should only light when high beam is energized. The light green wire at the dimmer sw would go the headlights via a light green wire and since there is a splice, also to the indicator light as light green. At the junction blocks on each side that light green wire should connect to a darker green wire going to the headlight buckets. Brown would go to brown at the junction blocks for low beam and pink is for parking lights.

If you have different colors at the junction blocks going to the buckets, conceivably someone could have changed buckets as I believe all years will fit and some might have different colors. Another possibility might be if someone just changed a socket and used wires which might be a different color.