Re: rochester carb for 1955 400
Posted by Eric Boyle On 2009/9/15 13:50:04
You could always do something like this:
Or the air horn adapter idea. That will raise the air cleaner approx. 1". The spacing is the same, the only problem is the diameter of the air horn. The only problem I've ever had with the Edelbrock carbs fitting was the throttle linkage on the carb hitting the heat crossover on the intake. This is solved with a 1/2" spacer. The carb works great, and I like the fact that it's brand new, and available in electric choke.
Or the air horn adapter idea. That will raise the air cleaner approx. 1". The spacing is the same, the only problem is the diameter of the air horn. The only problem I've ever had with the Edelbrock carbs fitting was the throttle linkage on the carb hitting the heat crossover on the intake. This is solved with a 1/2" spacer. The carb works great, and I like the fact that it's brand new, and available in electric choke.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=36724