Re: stop light switch 56 pat

Posted by Bowman Davis On 2007/10/27 23:01:39

Update: The brake lights and T/L are now working correctly. The correct wiring to the switch terminals is (looking at the termianl end, left to right) term 1, dk grn wire "brake light", term 2 (center term), Lt grn wire "T/L", term 3 purple or pink "12volt feed" The brake switch contacts (1) will activate (close)at about 80 to 85 psig, closing the circiut to term 3.
The shop manual is very unclear about how to correctly wire the switch. Thanks for your help and input. Next project, Fuel gauge problem.