Re: 55-56 Radiators
Posted by HH56 On 2010/6/5 20:00:25
There was a small thread on the AACA forum 4 yrs agohttp://forums.aaca.org/f134/radiator-216308.html where one poster mentioned he was adapting a Ford truck radiator. Turbopackman must have also been involved.
For some reason, I have pictures of brackets that were posted. No photos seem to show over there anymore and looking at the radiator, not sure why they were made or if needed. The partsamerica site mentioned is no longer good but here is a photo of Napa's cross for the part numbers given--regular and the heavy duty mentioned. The top connection is not in the center location but if everything else size wise works & fits, that should be a small detail with a different hose.
Attach file:
(62.74 KB)
For some reason, I have pictures of brackets that were posted. No photos seem to show over there anymore and looking at the radiator, not sure why they were made or if needed. The partsamerica site mentioned is no longer good but here is a photo of Napa's cross for the part numbers given--regular and the heavy duty mentioned. The top connection is not in the center location but if everything else size wise works & fits, that should be a small detail with a different hose.
Attach file:
(62.74 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=54090