Re: Where's The Stop Light Switch On My 56 Executive?

Posted by HH56 On 2010/9/3 20:33:59

Also verify the fuses are good. If the suspension is working properly, then all OK. If not, there are two fuse pigtails connected to the torsion level solenoids on the inner under side of fender in the area above the brake light switch. The 30 amp supplies the entire torsion level system and also via the 7 1/2 amp fuse the brake light circuit and level control switch.

EDIT: It is hydraulic. The switches are probably available locally as replacement for one VW used. Here is a thread with some alternative numbers including a mechanical conversion.https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=16977#forumpost16977