Re: Winter is acumin in. Goddamn, goddamn, goddamn...
Posted by HH56 On 2010/11/14 10:18:05
Hopefully all goes well, but if not I would only suggest a bit of caution if you do go directly.
If you cannot watch what is happening so you can stop movement immediately, then try to connect at the pink and yellow wire terminals at the control switch first and use the limit switches, solenoid, & remainder of the circuitry as designed.
If one of those is not working, then not much alternative to motor but be careful. The picture shows it all. Top piece is new and is how things should look, bottom assy is result of something allowing no limit switch with twisted off spine and bent rod. Those compensator assys have incredible power and there is only a brief moment between good and not good ($$$$).
Attach file:
(38.09 KB)
If you cannot watch what is happening so you can stop movement immediately, then try to connect at the pink and yellow wire terminals at the control switch first and use the limit switches, solenoid, & remainder of the circuitry as designed.
If one of those is not working, then not much alternative to motor but be careful. The picture shows it all. Top piece is new and is how things should look, bottom assy is result of something allowing no limit switch with twisted off spine and bent rod. Those compensator assys have incredible power and there is only a brief moment between good and not good ($$$$).
Attach file:
(38.09 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=64279