Re: Brake Upgrade

Posted by PackardV8 On 2009/4/3 8:26:32

Let us assume that the custom made bracket for the conversion is 1/2 inch steel. Certainly it is NO thicker than that?????

Ok. That means that 1/2 inch is is anchoring the caliper to keep the caliper from turning. NOW LOOK at a FACTORY Ford or Chev front disk brake set up. The Caliper Stays (anchors) are part of the steering knuckel AND AT LEAST THREE inches wide. NOT 1/2 inch wide!!!!!

Does this not raise any concerns for anyone ????????