Re: Brake Upgrade

Posted by Bill On 2008/1/7 12:09:44
Packard v8,
If you are measuring center to center of bolt, this why probably you got the 1/4" measure, when you measure, start on outside edge of first bolt and go to center of bolt , which should be second one going clockwise, and this should give either 4 1/2 or 5 as Packard shows both available. My Executive shows 4 1/2.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=4250