Re: linkage pictures.

Posted by buddyfromvb On 2011/2/27 10:45:03
the first pic shows the shift rod 1/2 inch away from the t bar in reverse
the second pic shows 1 inch in park
the third pic is a forward view
the forth shows a 2 and 3/8 inches from the plumb line to the old mstr cyl
the fifth is an overall view of the lower linkage this is not connected to the tranny so there may be some play i suspect not much from the left end though
let me know if i can send any more shots or measurements and good luck
all shots except first have shift lever in park also rod in park is above t bar slightly so reverse is a more critical dimension
perhaps you could get creative with the shape of the shift linkage if
needed
took a look at my packard which is on the road and noticed difference on orientation of shifter rod, looks like you could add another inch to my previous measurements .

Attach file:



jpg  (125.59 KB)
2263_4d6a6f3d15459.jpg 1600X1200 px

jpg  (163.18 KB)
2263_4d6a6f676b9b4.jpg 1600X1200 px

jpg  (159.07 KB)
2263_4d6a6f82f055a.jpg 1600X1200 px

jpg  (117.02 KB)
2263_4d6a6f9c962d5.jpg 1600X1200 px

jpg  (203.93 KB)
2263_4d6a6fc02459e.jpg 1600X1200 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=71572