Re: front floor pan thoughts

Posted by Cli55er On 2008/1/20 22:57:09

Pac-Man.....i will let you know what i need when it comes down to it. so far i am just dissambling things, but i am making a list and when it comes time i will post and put out points to see who has what and for how much. the only interior piece that is missing are the kick panels on the driver's and passenger's side, but i think just about any good upholstery shop should beable to reproduce just fine. i just need to know what the material was and the pattern too.

HH.....don't you just hate it when you are like...duuuuuhh....wish i thought of that....you are RIGHT!!! the trans is not shifting, thinking it is just the linkage needs to be lubed. the lever shifts, but doesn't change gears. i know the switch you are talking about.....but i just need to get under the car annd move the drive shaft a bit while my wife tries to change gears. the previous owner says it can get stuck in park sometimes and that wiggling the drive shaft might help a bit. i have not gotten under the car to check things out yet, taken it slow. i know the T/L is not turning on either and the switch under the dash doesn't matter what position it is in.

thanks for all the advise everyone, i will be very careful. i don't plan on taking anything off the dash, no need to, just take the dash out and leave the stuff on. the dash will need to be repainted, but i don't plan on taking the pull knobs, etc... off if i don't have too. i know the ant. knob is loose, so i will have to look at that.

later,

Hank