Re: Under floor modern booster update.
Posted by HH56 On 2011/3/25 11:40:03
Well, I see there have been a few downloads of the first two parts with no negative comment posted.
While I know it's not for everyone, for those that might be interested the lack of comment leads me to conclude 1), all came across readable, 2) one look told you it was too complicated so forget it, or 3) you fell asleep during the first paragraph.
With hope it being 1), here are the last sections with build and drawings and then installation. Hopefully, no major omissions or screwups in these.
As mentioned in various posts, this was designed around a 56 with pushbutton shift. I believe the linkages (at least the Ultramatic) will all clear for those cars but I did not have one to check against. While again not checked, I think it will also work on earlier cars since that BTV area is so similar. What I don't know on the earlier cars is what the linkage looks like at steering box since I know those go further down. There are a few pictures in the installation showing the clearances down there so anyone thinking of one would do well to check carefully.
Anyway, here's today's cure for insomnia.
Attach file:
Size: 412.23 KB; Hits: 39
Size: 339.47 KB; Hits: 71
While I know it's not for everyone, for those that might be interested the lack of comment leads me to conclude 1), all came across readable, 2) one look told you it was too complicated so forget it, or 3) you fell asleep during the first paragraph.
With hope it being 1), here are the last sections with build and drawings and then installation. Hopefully, no major omissions or screwups in these.
As mentioned in various posts, this was designed around a 56 with pushbutton shift. I believe the linkages (at least the Ultramatic) will all clear for those cars but I did not have one to check against. While again not checked, I think it will also work on earlier cars since that BTV area is so similar. What I don't know on the earlier cars is what the linkage looks like at steering box since I know those go further down. There are a few pictures in the installation showing the clearances down there so anyone thinking of one would do well to check carefully.
Anyway, here's today's cure for insomnia.
Attach file:
Size: 412.23 KB; Hits: 39 Size: 339.47 KB; Hits: 71This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=73032