Re: 1955 Packard shocks for car with TL

Posted by PackardV8 On 2011/6/13 10:00:14

If u are only interested in showing the car for ORIGINALITY then go with whatever Kanter recommends. My recommendation is to use the heaviest shock possible which i'm assuming is the "coil over booster" which i further assume has a coil spring made onto the shock.

I like the heaviest schock i can get to allow for any spring/torsion bar sag that mite occur over the last 50+ years.

Also check the "Packard Parts X-ref" in the Main Menue located on the left side of this forum.