Re: Is adding air conditioning an unobtainable myth?
Posted by HH56 On 2011/7/22 23:22:02
Not knowing what your compressor bracket looks like or where you are mounting the compressor makes definitive answers a bit difficult. The several home made, aftermarket and factory brackets shown on a few systems just in this one thread from before and after the meet over the last few days have things mounted all over the place. There are many other systems in other threads equally different.https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=81770#forumpost81770
If you are mounting the alternator in the standard generator spot, the bracket cortcomp posted or a universal like it will bolt to the original generator bracket holes and can be adjusted for the alternator front/back to line the belt up.
Here are a couple of pictures of the Packard pulley. The bolt is on quite tightly but removing it will let the extra pulleys fall off. As mentioned, the vibration damper stays keyed to crankshaft and the extra pulleys just slip into detents and recesses in the vibration damper and/or PS pulley.
Attach file:
(84.83 KB)
(78.10 KB)
If you are mounting the alternator in the standard generator spot, the bracket cortcomp posted or a universal like it will bolt to the original generator bracket holes and can be adjusted for the alternator front/back to line the belt up.
Here are a couple of pictures of the Packard pulley. The bolt is on quite tightly but removing it will let the extra pulleys fall off. As mentioned, the vibration damper stays keyed to crankshaft and the extra pulleys just slip into detents and recesses in the vibration damper and/or PS pulley.
Attach file:
(84.83 KB)
(78.10 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=82094