Quote:
is this possible...will the rubber survive the oven?
i'm thinking i'm going to want to powerder coat all my under hood black parts....but i'm concerned that the harmonic balancer wont survive the oven afterwards....even thought the under hood temps are probably in the 200s or more....but the ovens are higher for powdercoating i'm pretty sure.
thanks and sorry if this is a silly question.
Getting back to the original, not-so-silly, question, why even bother with powdercoating in this case?
The balancer really isn't subject to high temperatures in normal operation. If baking temperature is an issue, why not coat the cleaned/refurbished part with good old POR-15, then top-coat in the color and compatible finish of your choice? IIRC, you've used POR-15 product elsewhere on the Clipper, no?
I've had results ranging from good to excellent with POR-15 and related product. However, if you don't read, understand and follow their direction, you'll be disappointed (and might even ruin some equipment).
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=86319