Re: waterpump woes
Posted by Tim Cole On 2012/1/22 9:41:30
Dear 55 Clipper:
Actually the production time for your unit is less than half an hour at a mass rebuilder. They have presses set up for runs of specific pumps.
I used to do those things, but found that buying the completed unit from a vendor was more cost effective.
The pulley hub will come off given the unit is placed in an arbor press with a bearing splitter and a cardboard box to catch the falling pump.
When disassembling high dollar (Packard) pumps the careful application of a torch will prevent casting damage and free stubborn parts like that pulley hub.
Hope this helps
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=93344