Custom 352" Packard V8 with JE forged pistons
Posted by Jack Vines On 2012/2/12 14:35:18
It's a long process from start to finish. Here's how it looked when we received it.
Inside were several things I'd never found OEM in a Packard V8
Disassembling and cleaning is the most labor-intensive part of the process. After pressure washing, shot blasting, boring, honing with a deck plate, decking the block and align honing the main bores, here's how it looks today.
And the JE .030" over custom forged pistons
jack vines
Inside were several things I'd never found OEM in a Packard V8
Disassembling and cleaning is the most labor-intensive part of the process. After pressure washing, shot blasting, boring, honing with a deck plate, decking the block and align honing the main bores, here's how it looks today.
And the JE .030" over custom forged pistons
jack vines
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=94728