Re: brake switch to abs master cylinder with electric pump
Posted by buddyfromvb On 2012/3/15 16:54:58
pictures of calipers and disk conversion
#1 view of overall disk and caliper cotter pin was to big and caused damage to dust cap had to use a smaller one after calling abs to check for larger cap he told me it was probably the cotter pin new cap will be ordered
#2 view from front showing old packard bolt on bottom with castle nut to secure steering arm and abs bolt and spacer at top
#3 showing back view showing packard bolt on bottom with steering stop and if you look at the casting you will notice righ cast in the back of the calliper that does include the t and yes the calliper stamped right is on the left side abs said this was the solution as i called them and they said as long as the bleeder is on top we are good
#4 view from front
#5 location of master cyl remote fill bottle
Attach file:
(102.95 KB)
(114.09 KB)
(134.14 KB)
(110.07 KB)
(129.54 KB)
#1 view of overall disk and caliper cotter pin was to big and caused damage to dust cap had to use a smaller one after calling abs to check for larger cap he told me it was probably the cotter pin new cap will be ordered
#2 view from front showing old packard bolt on bottom with castle nut to secure steering arm and abs bolt and spacer at top
#3 showing back view showing packard bolt on bottom with steering stop and if you look at the casting you will notice righ cast in the back of the calliper that does include the t and yes the calliper stamped right is on the left side abs said this was the solution as i called them and they said as long as the bleeder is on top we are good
#4 view from front
#5 location of master cyl remote fill bottle
Attach file:
(102.95 KB)
(114.09 KB)
(134.14 KB)
(110.07 KB)
(129.54 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=96864