Re: Parts in bottom of trans pan
Posted by Cli55er On 2012/4/5 13:08:59
here is the piece from my car. you can see the plungers with the little balls on the end of them. the spring pushes against those which locks them into the detents for each lever change on the steering column.
the little cap that is staked in holds the spring.
most likely...from your picture...you lost the other side...the side you are showing in your picture seems to still be okay. the little plunger with the ball on it may still be in the hole the spring and cap fell out of on the other side.
take the valvebody down and inspect.
Hank
Attach file:
(117.47 KB)
the little cap that is staked in holds the spring.
most likely...from your picture...you lost the other side...the side you are showing in your picture seems to still be okay. the little plunger with the ball on it may still be in the hole the spring and cap fell out of on the other side.
take the valvebody down and inspect.
Hank
Attach file:
(117.47 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=98363