Re: engine is out... now what do I do?
Posted by Keegan Chaput On 2012/5/22 22:51:37
Removed the pan and got the motor rolled over on the engine stand. I snapped some pictures of the oil pump. You guys can tell me what I've got here.
The pump has the number 440662 cast on it if that means much.
The pan had some expected sludge in the bottom and I didn't find any large chunks of iron thankfully. I did find tiny rocks and such. This oil pan has been through some abuse. They obviously hit something with it. Added a skid plate and brazed in a new drain plug. It was holding oil without signs of leaks, so at least the repairs seem successful.
Tomorrow I plan to get some plastiguage and check a couple main bearings.
Attach file:
(112.42 KB)
(123.99 KB)
(129.28 KB)
(130.77 KB)
(149.71 KB)
The pump has the number 440662 cast on it if that means much.
The pan had some expected sludge in the bottom and I didn't find any large chunks of iron thankfully. I did find tiny rocks and such. This oil pan has been through some abuse. They obviously hit something with it. Added a skid plate and brazed in a new drain plug. It was holding oil without signs of leaks, so at least the repairs seem successful.
Tomorrow I plan to get some plastiguage and check a couple main bearings.
Attach file:
(112.42 KB)
(123.99 KB)
(129.28 KB)
(130.77 KB)
(149.71 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=101949