Re: Removal of gas sending unit?

Posted by Bowman Davis On 2008/5/5 9:38:14

Randy, It is a 56 Patrician.

Owen, I did spray 3 times it with PB Blaster after wire brushing with a brass brush. I also sprayed it as I "gently" tapped the ears CCW. You are right, I sure don't want to damage it trying to get it out. The ears are pretty sharp so wooden blocks don't work well. I'll buy a plastic faced hammer. i had a brass hammer but, it apparently ran away from home or found a good hiding place.
Thanks to you both.