Re: '56 Patrician Diff Pinion Seal
Posted by Randy Berger On 2012/6/27 22:01:19
You can use two different size sockets and a large vise to press out the two rear bearings - AFTER you remove the circlips 
I did have the advantage of a tool to press them out.
Carefully remove and wash all the needle bearings one cup at a time and repack them. I like the newer blue grease as water will not wash it away.
Do likewise with the front trunnion. Do not overpack the grease there. That should sustain you for 25K at least.
Owen is about right on the money for time.
I did have the advantage of a tool to press them out.Carefully remove and wash all the needle bearings one cup at a time and repack them. I like the newer blue grease as water will not wash it away.
Do likewise with the front trunnion. Do not overpack the grease there. That should sustain you for 25K at least.
Owen is about right on the money for time.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=104336