Re: Torsion Level Problem

Posted by R H On 2012/6/23 15:23:03
Jed,

Check the rear sway bar bushings too,,,might as well replace those too..


also, the ones that are giving the (ride),,,i think you will find are the bushings on the bottom, that the rear shock is mounted to..the upper(s),,don't really cause problems.


if the 56 bushings don't do the trick,,the round ones. i would try the 55 rectangle ones without the cup. they are thicker too.

on the bottom, they changed in 56,, went round all around.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=104059