Re: Torsion Level Problem

Posted by Jed Sheehan On 2012/7/24 16:47:39

Howard,

We have looked at the wiring pretty closely. The limit switches were in bad shape which is why we replaced them. The control box is a new solid state unit which we just received from Packards International. The T-L system was doing the same thing with old original unit.

The car had a new front wiring harness installed about 8 years ago so most of the wiring is in good shape. The car also has the brake light switch replacement unit from PI which has been on the car for about 10 years.

I haven't tried to turn off the under dash switch while it's see-sawing on the interstate, but do turn off the unit when I'm cleaning or changing a tire in my driveway. The under dash switch seems to work fine.

Jed