Re: What's involved in straigtening this door?

Posted by Rusty O\'Toole On 2012/12/8 21:45:52
On taking a close up view of the picture it appears the door just needs to be adjusted in at the bottom. This should not take long.

It also appears the chrome was installed somewhat hastily and could do with some adjusting.

Camera angles can be tricky so I could be all wet on this, but it appears the door is not too far out of whack and could be adjusted in under an hour.

If the fender needs to be brought in at the bottom that is not usually too hard, there may be 2 or 3 bolts at the bottom of the fender that are slotted for adjustment. If they are not rusted solid, or the fender has not been patched this is easy to adjust.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=114149