Re: Clipper Rims and epoxy primer
Posted by Mr.Pushbutton On 2013/4/15 12:29:28
We used to either glass bead them or chem-strip (then finish glass bead) rims and epoxy prime. If there are pits on the inside sealing surface of the rim we would spray K36 build up primer (sandable) over the pitted surface and sand back to the original height, filling all the pits and making the sealing surfaces like new. Then paint with color. That took care of the leakers.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=121072