Re: Non Packard--forgive me

Posted by Ross On 2013/8/10 7:03:25

I am sure the disc is just stuck. Some are prone to that. PackardV8's plan is quite good.

If all else fails, get the car up on jack stands and remove the cover under the clutch--can't recall if Caddies have one or if the bell housing is a full circle. Have someone hold down the clutch pedal and wedge a putty knife between the clutch and flywheel and between the clutch and pressure plate. That should break it free. Take the car for a long drive and be sure to get the clutch good and hot to drive off any moisture which is the root cause of this evil.

Packard0, you need to go online or to a flea market and buy an old 1950's Motor Manual or similar if you are going to mess with these old cars. They are crammed with information, and often it is easier to find the information in them than in the factory manuals as it is condensed and tabulated year by year. They also include some very useful exploded views identifying parts. Fabulous education for 20 smackers or so.