Re: Spindle Specs

Posted by PackardV8 On 2008/10/21 22:13:02

Are u wanting specs for JUST the spindle itself or the entire steering knuckle?????? THe best thing to do is to deliver an entire knuckle to the vendor.

The spindle is just the SHAFT that is pressed and then welded into the knuckle. The knuckle is the entire assembly of the spindle and knuckel that the king pin passes thru. The spindle is pressed into the knuckle ON AN ANGLE relative to the king pin. Not sure if that angle spec. is available unless someone has a print. That's why it would be best ot supplt the entire knuckle to the vendor.