Re: keegan's Rhino bushings
Posted by PackardV8 On 2008/10/30 18:29:21
Keegan:
see pic of 56 cowl body insulators. Should be the same as over the axle body mounts. I have the mould made for the top rubber with the lip, the one on the rite side of the pic. Need to know shrinkage (if any) percentage for the Rhino juice. I'll send u the mould if u want it. Will make mould for the bottom one too.
Pic of mould in bottom pic. It will produce the lip in one pour.
Attach file:
(39.29 KB)
(35.64 KB)
see pic of 56 cowl body insulators. Should be the same as over the axle body mounts. I have the mould made for the top rubber with the lip, the one on the rite side of the pic. Need to know shrinkage (if any) percentage for the Rhino juice. I'll send u the mould if u want it. Will make mould for the bottom one too.
Pic of mould in bottom pic. It will produce the lip in one pour.
Attach file:
(39.29 KB)
(35.64 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=15518