Re: keegan's Rhino bushings

Posted by PackardV8 On 2008/10/31 21:22:35

I measured the cowl mounts (on the body) today and it is 0.160 inch thick stamped steel.

BUT, go back and look at the cowl rubbers in the pic i posted yesterday. The lower rubber has a rather deep hole in it to accomodate at least a 1/4 inch. Or maybe it's just the way they deformed over the years. I don't know.

CORRECTED post: 11-03-08. I corrected above the cowl mount thickness (at the hole) from 1/10 inch to .160 inch. It's a bimetal stamping spot welded together and the lip is deceiving when measuing. So, the thickness of metal at the HOLE is .160 inch.